Glass Drilling and Milling Machine

topDRILL M-RX [G5]

Vertical, double-sided glass drilling and milling center

The fully automated processing center topDRILL M-RX guarantees high-speed, flexible and uncomplicated processing of flat glass. Complex milling cutouts can be combined with drilling and countersinking in one work step. The topDRILL M-RX is available in working heights of 1,300 mm and 2,000 mm.

Technical Data

topDRILL M-RX [G5]	Technical Data
Glass height	Open at the top (M-RX 130) / 2,600 mm (M-RX 200)
Max. processing height	1.300 mm (RX 130) / 2.400 mm (RX 240)
Glass thickness	4 - 20 mm
Minimum glass size	600 x 160 mm
Maximum glass size	approx. 3,200 mm, can be increased with extension modules
Transport height	600 mm
Angle of inclination	7° (+/- 1°)
Max. bore diameter	80 mm
Spindle speed	0 – 12,000 rpm
Spindle power (rating)	2 x 5,5 kW
Number of tools	8 + 8 in case of Linear 8 / 10 + 10 in case of Roto 10
Max. load	150 kg/lm

Milling and drilling in one work step
Two types of tool changers available
Modular design
Continuous production without loading times
Flexible product change
Highly dynamic vacuum system for secure hold
Easy operation and programming

The Highlights

Modular design

The topDRILL M-RX is available in two working heights, and the well-considered design of the machine even allows processing sheets which exceed the maximum working height. The length of the machine, and therefore the maximum sheet length, can be expanded at any time.

Tool changers meet any requirement

The topDRILL M-RX is available in two versions. The Linear-8 tool changer with 8 magazine slots at the front and back offers a reliable, uncomplicated solution. In case of increased cycle time requirements the Roto-10 Revolver (10 + 10 magazines) with preselection allows a rapid changeover.

Easy operation and programming

Operation of the machine is possible with just one fully integrated software program. All tool settings as well as process parameters such as feed rates or speeds are fully automated but can be adjusted by the operator if necessary. The vacuum hold of the glass plates also operates autonomously, even in case of shapes.