The new topDRILL NC 14 of the G8 series is a further development of the well-known topDRILL drilling machines. The system is very compact and the design is open at the top. The machine is optimally suited for drilling individual pieces or series with the same drilling diameters.
Surface and edge cut-outs can be created very economically in conjunction with the optional waterjet head.
As with all G8 systems, the NC 14 can be installed as a stand-alone unit or as part of the combiFIN line. A topCLEAR washing machine can also be combined at any time.
The NC machine uses the extremely massive base frame of the G8 series. This facilitates the combination of different heights, drilling heads and construction lengths. Since the design of the NC 14 is open at the top, it is possible to process taller glass, as long as the maximum dimensions are observed.
The front and rear Y-bars for moving the drilling heads sit on the base frame. The safety cladding and the control cabinet are fully integrated into the base frame.
If the NC system is installed as a stand-alone machine, the system can be mounted directly on a back wall to save a great deal of space. Maintenance access is possible in each case from the side.
The base frame can be extended on the right and left with extension modules (depending on the desired maximum glass length). The NC machine can be expanded into a processing line with the GLX grinding machine. The topCLEAR washing machines may also be integrated into the system. The topDRILL NC machines are available in the running direction of your choice.
topDRILL NC drilling machines are vertical machines for drilling flat glass on both sides, optionally with a manual drill bit quick-change and the equipment for waterjet cutting.
The NC is very flexible and can be used for various data input options (directly on the machine, in the office, via an interface). The glass sheet is placed at any position on the inlet side. The operator starts the desired program and the sheet moves to the drilling heads. Inside the safety enclosure, the starting edge of the sheet is measured (rectangle or shape, a straight lower edge is necessary) and the glass thickness is checked. The drilling process is automatic. If several diameters are required in a sheet, the smallest diameter is started as standard. The next tools are then displayed to the operator.
When using the optional CMX quick-change system, it is possible to change drills on both sides from the front of the machine in just a few seconds.
If the system is equipped with the optional waterjet cutting head, it is also possible to make any type of cut-out with the machine, e.g. for shower or all-glass doors. Different drilling diameters are also possible.
The topDRILL NC 14 G8 is suitable for any modern glass processing operation relying on uniform processing with regular glass heights. The available extension modules mean that the system or the maximum glass length can be adjusted to suit requirements.
The vertical design and very compact construction allows the G8 machines to also be installed in confined spaces. The side maintenance access points ensure that the machine can be installed directly against a wall.
Investment security is ensured thanks to the possibility of expansion with additional modules or further processing devices.
The topDRILL NC series is the original when it comes to vertical drilling machines. The system has been optimised and modernised to the latest stage of development, both mechanically and in terms of programming.
The topDRILL NC 14 G8 can be installed as a stand-alone machine or in combination with a GLX, for example, to form a machining line. A topCLEAR washing machine can be combined at any time, since the necessary internal interface is provided as standard.
Thanks to the optionally available waterjet head, the machine can also produce individual edge and surface cut-outs.
Feel free to contact me if you have any further questions.