The fully automated processing center topDRILL M-RX guarantees high-speed, flexible and uncomplicated processing of flat glass. Complex milling cutouts can be combined with drilling and countersinking in one work step. The topDRILL M-RX is available in working heights of 1,300 mm and 2,000 mm.
Technical Data
topDRILL M-RX [G5] | Technical Data |
---|---|
Glass height | Open at the top (M-RX 130) / 2,600 mm (M-RX 200) |
Max. processing height | 1.300 mm (RX 130) / 2.400 mm (RX 240) |
Glass thickness | 4 - 20 mm |
Minimum glass size | 600 x 160 mm |
Maximum glass size | approx. 3,200 mm, can be increased with extension modules |
Transport height | 600 mm |
Angle of inclination | 7° (+/- 1°) |
Max. bore diameter | 80 mm |
Spindle speed | 0 – 12,000 rpm |
Spindle power (rating) | 2 x 5,5 kW |
Number of tools | 8 + 8 in case of Linear 8 / 10 + 10 in case of Roto 10 |
Max. load | 150 kg/lm |
Modular design
The topDRILL M-RX is available in two working heights, and the well-considered design of the machine even allows processing sheets which exceed the maximum working height. The length of the machine, and therefore the maximum sheet length, can be expanded at any time.
Tool changers meet any requirement
The topDRILL M-RX is available in two versions. The Linear-8 tool changer with 8 magazine slots at the front and back offers a reliable, uncomplicated solution. In case of increased cycle time requirements the Roto-10 Revolver (10 + 10 magazines) with preselection allows a rapid changeover.
Easy operation and programming
Operation of the machine is possible with just one fully integrated software program. All tool settings as well as process parameters such as feed rates or speeds are fully automated but can be adjusted by the operator if necessary. The vacuum hold of the glass plates also operates autonomously, even in case of shapes.